DBA Hub

📋Steps in this guide1/13

Data Guard Physical Standby Setup Using the Data Guard Broker in Oracle Database 12c Release 1

This article contains an example of setting up a physical standby database for Oracle 12c Release 1 using the Data Guard Broker.

oracle 12cconfigurationintermediate
by OracleDba
26 views
1

TL;DR

If you already know about Data Guard and want to quickly set up a demo environment using VirtualBox and Vagrant you can follow the instructions in my GitHub repository here .
2

Assumptions

- You have two servers (physical or VMs) with an operating system and Oracle installed on them. In this case I've used Oracle Linux 7.2 and Oracle Database 12.1.0.2. - The primary server (ol7-121-dg1.locadomain) has a running instance. - The standby server (ol7-121-dg2.locadomain) has a software only installation. - There is nothing blocking communication between the machines over the listener ports. If you are using the default 1521 port, node 1 should be able to communicate to node 2 on 1521 and node 2 should be able communicate with node 1 on 1521. Check network and local firewalls are not blocking the communication.
3

Logging

Check that the primary database is in archivelog mode. If it is noarchivelog mode, switch is to archivelog mode. Enabled forced logging by issuing the following command. Create standby redo logs on the primary database (in case of switchovers). The standby redo logs should be at least as big as the largest online redo log and there should be one extra group per thread compared the online redo logs. In my case, the following standby redo logs must be created on both servers. If you want to use flashback database, enable it on the primary now, so it will be enabled on the standby also. It's very useful as you will see below.

Code/Command (click line numbers to comment):

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
SELECT log_mode FROM v$database;

LOG_MODE
------------
NOARCHIVELOG

SQL>

SHUTDOWN IMMEDIATE;
STARTUP MOUNT;
ALTER DATABASE ARCHIVELOG;
ALTER DATABASE OPEN;

ALTER DATABASE FORCE LOGGING;
-- Make sure at least one logfile is present.
ALTER SYSTEM SWITCH LOGFILE;

-- If Oracle Managed Files (OMF) is used.
ALTER DATABASE ADD STANDBY LOGFILE THREAD 1 GROUP 10 SIZE 50M;
ALTER DATABASE ADD STANDBY LOGFILE THREAD 1 GROUP 11 SIZE 50M;
ALTER DATABASE ADD STANDBY LOGFILE THREAD 1 GROUP 12 SIZE 50M;
ALTER DATABASE ADD STANDBY LOGFILE THREAD 1 GROUP 13 SIZE 50M;

-- If Oracle Managed Files (OMF) is not used.
ALTER DATABASE ADD STANDBY LOGFILE THREAD 1 GROUP 10 ('/u01/app/oracle/oradata/cdb1/standby_redo01.log') SIZE 50M;
ALTER DATABASE ADD STANDBY LOGFILE THREAD 1 GROUP 11 ('/u01/app/oracle/oradata/cdb1/standby_redo02.log') SIZE 50M;
ALTER DATABASE ADD STANDBY LOGFILE THREAD 1 GROUP 12 ('/u01/app/oracle/oradata/cdb1/standby_redo03.log') SIZE 50M;
ALTER DATABASE ADD STANDBY LOGFILE THREAD 1 GROUP 13 ('/u01/app/oracle/oradata/cdb1/standby_redo04.log') SIZE 50M;

ALTER DATABASE FLASHBACK ON;
4

Initialization Parameters

Check the setting for the and parameters. In this case they are both set to "cdb1" on the primary database. The of the standby database will be the same as that of the primary, but it must have a different value. For this example, the standby database will have the value "cdb1_stby". Make sure the parameter is set.

Code/Command (click line numbers to comment):

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
SQL> show parameter db_name

NAME				     TYPE	 VALUE
------------------------------------ ----------- ------------------------------
db_name 			     string	 cdb1

SQL> show parameter db_unique_name

NAME				     TYPE	 VALUE
------------------------------------ ----------- ------------------------------
db_unique_name			     string	 cdb1

SQL>

ALTER SYSTEM SET STANDBY_FILE_MANAGEMENT=AUTO;
5

Service Setup

Entries for the primary and standby databases are needed in the "$ORACLE_HOME/network/admin/tnsnames.ora" files on both servers. You can create these using the Network Configuration Utility (netca) or manually. The following entries were used during this setup. Notice the use of the , rather than the in the entries. This is important as the broker will need to connect to the databases when they are down, so the services will not be present. The "$ORACLE_HOME/network/admin/listener.ora" file on the primary server contains the following configuration. The "$ORACLE_HOME/network/admin/listener.ora" file on the standby server contains the following configuration. Since the broker will need to connect to the database when it's down, we can't rely on auto-registration with the listener, hence the explicit entry for the database. Once the listener.ora changes are in place, restart the listener on both servers.

Code/Command (click line numbers to comment):

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
cdb1 =
  (DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ol7-121-dg1)(PORT = 1521))
    )
    (CONNECT_DATA =
      (SID = cdb1)
    )
  )

cdb1_stby =
  (DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ol7-121-dg2)(PORT = 1521))
    )
    (CONNECT_DATA =
      (SID = cdb1)
    )
  )

LISTENER =
  (DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ol7-121-dg1)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    )
  )

SID_LIST_LISTENER =
  (SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = cdb1_DGMGRL)
      (ORACLE_HOME = /u01/app/oracle/product/12.1.0.2/db_1)
      (SID_NAME = cdb1)
    )
  )

ADR_BASE_LISTENER = /u01/app/oracle

LISTENER =
  (DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ol7-121-dg2)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    )
  )

SID_LIST_LISTENER =
  (SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = cdb1_stby_DGMGRL)
      (ORACLE_HOME = /u01/app/oracle/product/12.1.0.2/db_1)
      (SID_NAME = cdb1)
    )
  )

ADR_BASE_LISTENER = /u01/app/oracle

lsnrctl stop
lsnrctl start
6

Prepare for Duplicate

Create a parameter file for the standby database called "/tmp/initcdb1_stby.ora" with the following contents. Create the necessary directories on the standby server. Create a password file, with the SYS password matching that of the primary database.

Code/Command (click line numbers to comment):

1
2
3
4
5
6
7
8
*.db_name='cdb1'

mkdir -p /u01/app/oracle/oradata/cdb1/pdbseed
mkdir -p /u01/app/oracle/oradata/cdb1/pdb1
mkdir -p /u01/app/oracle/fast_recovery_area/cdb1
mkdir -p /u01/app/oracle/admin/cdb1/adump

$ orapwd file=/u01/app/oracle/product/12.1.0.2/db_1/dbs/orapwcdb1 password=Password1 entries=10
7

Create Standby Using DUPLICATE

Start the auxiliary instance on the standby server by starting it using the temporary "init.ora" file. Connect to RMAN, specifying a full connect string for both the TARGET and AUXILIARY instances. Do not attempt to use OS authentication. Now issue the following DUPLICATE command. If you need to convert file locations, or alter any initialisation parameters, you can do this during the using the command. A brief explanation of the individual clauses is shown below. - : This tells the command is to be used for a standby, so it will not force a DBID change. - : The will be created directly from the source datafiles, without an additional backup step. - : The will include the recovery step, bringing the standby up to the current point in time. - : Allows us to reset values in the spfile when it is copied from the source server. - : Destination file locations are not checked. Once the command is complete, we can start using the broker.

Code/Command (click line numbers to comment):

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
$ export ORACLE_SID=cdb1
$ sqlplus / as sysdba

SQL> STARTUP NOMOUNT PFILE='/tmp/initcdb1_stby.ora';

$ rman TARGET sys/Password1@cdb1 AUXILIARY sys/Password1@cdb1_stby

DUPLICATE TARGET DATABASE
  FOR STANDBY
  FROM ACTIVE DATABASE
  DORECOVER
  SPFILE
    SET db_unique_name='cdb1_stby' COMMENT 'Is standby'
  NOFILENAMECHECK;

DUPLICATE TARGET DATABASE
  FOR STANDBY
  FROM ACTIVE DATABASE
  DORECOVER
  SPFILE
    SET db_unique_name='cdb1_stby' COMMENT 'Is standby'
    SET db_file_name_convert='/original/directory/path1/','/new/directory/path1/','/original/directory/path2/','/new/directory/path2/'
    SET log_file_name_convert='/original/directory/path1/','/new/directory/path1/','/original/directory/path2/','/new/directory/path2/'
    SET job_queue_processes='0'
  NOFILENAMECHECK;
8

Enable Broker

At this point we have a primary database and a standby database, so now we need to start using the Data Guard Broker to manage them. Connect to both databases (primary and standby) and issue the following command. On the primary server, issue the following command to register the primary server with the broker. Now add the standby database. Now we enable the new configuration. The following commands show how to check the configuration and status of the databases from the broker.

Code/Command (click line numbers to comment):

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
ALTER SYSTEM SET dg_broker_start=true;

$
dgmgrl sys/Password1@cdb1
DGMGRL for Linux: Version 12.1.0.2.0 - 64bit Production

Copyright (c) 2000, 2013, Oracle. All rights reserved.

Welcome to DGMGRL, type "help" for information.
Connected as SYSDBA.
DGMGRL>
CREATE CONFIGURATION my_dg_config AS PRIMARY DATABASE IS cdb1 CONNECT IDENTIFIER IS cdb1;
Configuration "my_dg_config" created with primary database "cdb1"
DGMGRL>

DGMGRL>
ADD DATABASE cdb1_stby AS CONNECT IDENTIFIER IS cdb1_stby;
Database "cdb1_stby" added
DGMGRL>

DGMGRL>
ENABLE CONFIGURATION;
Enabled.
DGMGRL>

DGMGRL>
SHOW CONFIGURATION;
Configuration - my_dg_config

  Protection Mode: MaxPerformance
  Members:
  cdb1      - Primary database
    cdb1_stby - Physical standby database

Fast-Start Failover: DISABLED

Configuration Status:
SUCCESS   (status updated 26 seconds ago)

DGMGRL>
SHOW DATABASE cdb1;
Database - cdb1

  Role:               PRIMARY
  Intended State:     TRANSPORT-ON
  Instance(s):
    cdb1

Database Status:
SUCCESS

DGMGRL>
SHOW DATABASE cdb1_stby;
Database - cdb1_stby

  Role:               PHYSICAL STANDBY
  Intended State:     APPLY-ON
  Transport Lag:      0 seconds (computed 1 second ago)
  Apply Lag:          0 seconds (computed 1 second ago)
  Average Apply Rate: 11.00 KByte/s
  Real Time Query:    OFF
  Instance(s):
    cdb1

Database Status:
SUCCESS

DGMGRL>
9

Database Switchover

A database can be in one of two mutually exclusive modes (primary or standby). These roles can be altered at runtime without loss of data or resetting of redo logs. This process is known as a Switchover and can be performed using the following commands. Connect to the primary database (cdb1) and switchover to the standby database (cdb1_stby). Let's switch back to the original primary. Connect to the new primary (cdb1_stby) and switchover to the new standby database (cdb1).

Code/Command (click line numbers to comment):

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
$
dgmgrl sys/Password1@cdb1
DGMGRL for Linux: Version 12.1.0.2.0 - 64bit Production

Copyright (c) 2000, 2013, Oracle. All rights reserved.

Welcome to DGMGRL, type "help" for information.
Connected as SYSDBA.
DGMGRL>
SWITCHOVER TO cdb1_stby;
Performing switchover NOW, please wait...
Operation requires a connection to instance "cdb1" on database "cdb1_stby"
Connecting to instance "cdb1"...
Connected as SYSDBA.
New primary database "cdb1_stby" is opening...
Operation requires start up of instance "cdb1" on database "cdb1"
Starting instance "cdb1"...
ORACLE instance started.
Database mounted.
Switchover succeeded, new primary is "cdb1_stby"
DGMGRL>

$
dgmgrl sys/Password1@cdb1_stby
DGMGRL for Linux: Version 12.1.0.2.0 - 64bit Production

Copyright (c) 2000, 2013, Oracle. All rights reserved.

Welcome to DGMGRL, type "help" for information.
Connected as SYSDBA.
DGMGRL>
SWITCHOVER TO cdb1;
Performing switchover NOW, please wait...
Operation requires a connection to instance "cdb1" on database "cdb1"
Connecting to instance "cdb1"...
Connected as SYSDBA.
New primary database "cdb1" is opening...
Operation requires start up of instance "cdb1" on database "cdb1_stby"
Starting instance "cdb1"...
ORACLE instance started.
Database mounted.
Switchover succeeded, new primary is "cdb1"
DGMGRL>
10

Database Failover

If the primary database is not available the standby database can be activated as a primary database using the following statements. Connect to the standby database (cdb1_stby) and failover. Since the standby database is now the primary database it should be backed up immediately. The original primary database can now be configured as a standby. If flashback database was enabled on the primary database, then this can be done relatively easily with the following command. If flashback database is not enabled, you would have to manually recreate cdb1 as a standby. The basic process is the reverse of what you did previously.

Code/Command (click line numbers to comment):

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
$
dgmgrl sys/Password1@cdb1_stby
DGMGRL for Linux: Version 12.1.0.2.0 - 64bit Production

Copyright (c) 2000, 2013, Oracle. All rights reserved.

Welcome to DGMGRL, type "help" for information.
Connected as SYSDBA.
DGMGRL>
FAILOVER TO cdb1_stby;
Performing failover NOW, please wait...
Failover succeeded, new primary is "cdb1_stby"
DGMGRL>

DGMGRL>
REINSTATE DATABASE cdb1;
Reinstating database "cdb1", please wait...
Operation requires shut down of instance "cdb1" on database "cdb1"
Shutting down instance "cdb1"...
ORACLE instance shut down.
Operation requires start up of instance "cdb1" on database "cdb1"
Starting instance "cdb1"...
ORACLE instance started.
Database mounted.
Continuing to reinstate database "cdb1" ...
Reinstatement of database "cdb1" succeeded
DGMGRL>

# 1) Cleanup the old instance.
sqlplus / as sysdba <<EOF
SHUTDOWN IMMEDIATE;
EXIT;
EOF
 
rm -Rf /u01/app/oracle/oradata/cdb1/*
rm -Rf /u01/app/oracle/fast_recovery_area/cdb1
rm -Rf /u01/app/oracle/fast_recovery_area/CDB1_STBY
rm -Rf /u01/app/oracle/admin/cdb1
mkdir -p /u01/app/oracle/fast_recovery_area/cdb1
mkdir -p /u01/app/oracle/admin/cdb1/adump
mkdir -p /u01/app/oracle/oradata/cdb1/pdbseed
mkdir -p /u01/app/oracle/oradata/cdb1/pdb1
rm $ORACLE_HOME/dbs/spfilecdb1.ora

export ORACLE_SID=cdb1
sqlplus / as sysdba <<EOF
STARTUP NOMOUNT PFILE='/tmp/initcdb1_stby.ora';
EXIT;
EOF

# 2) Connect to RMAN.
$ rman TARGET sys/Password1@cdb1_stby AUXILIARY sys/Password1@cdb1

# 3) Duplicate the database.
DUPLICATE TARGET DATABASE
  FOR STANDBY
  FROM ACTIVE DATABASE
  DORECOVER
  SPFILE
    SET db_unique_name='cdb1' COMMENT 'Is standby'
  NOFILENAMECHECK;

# 4) Connect to DGMDRL on the current primary.
$ dgmgrl sys/Password1@cdb1_stby

# 5) Enable the new standby.
DGMGRL> ENABLE DATABASE cdb1;
11

Flashback Database

It was already mentioned in the previous section, but it is worth drawing your attention to Flashback Database once more. Although a switchover/switchback is safe for both the primary and standby database, a failover renders the original primary database useless for converting to a standby database. If flashback database is not enabled, the original primary must be scrapped and recreated as a standby database. An alternative is to enable flashback database on the primary (and the standby if desired) so in the event of a failover, the primary can be flashed back to the time before the failover and quickly converted to a standby database, as shown above.
12

Read-Only Standby and Active Data Guard

Once a standby database is configured, it can be opened in read-only mode to allow query access. This is often used to offload reporting to the standby server, thereby freeing up resources on the primary server. When open in read-only mode, archive log shipping continues, but managed recovery is stopped, so the standby database becomes increasingly out of date until managed recovery is resumed. To switch the standby database into read-only mode, do the following. To resume managed recovery, do the following. In 11g, Oracle introduced the Active Data Guard feature. This allows the standby database to be open in read-only mode, but still apply redo information. This means a standby can be available for querying, yet still be up to date. There are licensing implications for this feature, but the following commands show how active data guard can be enabled. Since managed recovery continues with active data guard, there is no need to switch back to managed recovery from read-only mode in this case.

Code/Command (click line numbers to comment):

1
2
3
4
5
6
7
8
9
10
11
12
SHUTDOWN IMMEDIATE;
STARTUP MOUNT;
ALTER DATABASE OPEN READ ONLY;

SHUTDOWN IMMEDIATE;
STARTUP MOUNT;
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;

SHUTDOWN IMMEDIATE;
STARTUP MOUNT;
ALTER DATABASE OPEN READ ONLY;
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
13

Snapshot Standby

Introduced in 11g, snapshot standby allows the standby database to be opened in read-write mode. When switched back into standby mode, all changes made whilst in read-write mode are lost. This is achieved using flashback database, but the standby database does not need to have flashback database explicitly enabled to take advantage of this feature, thought it works just the same if it is. Connect to the primary (cdb1) database and convert the standby database (cdb1_stby) to a snapshot standby. When you are finished with the snapshot standby, convert it back to a standby database. The standby is once again in managed recovery and archivelog shipping is resumed. Notice that flashback database is still not enabled. For more information see: Hope this helps. Regards Tim...

Code/Command (click line numbers to comment):

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
$
dgmgrl sys/Password1@cdb1
DGMGRL for Linux: Version 12.1.0.2.0 - 64bit Production

Copyright (c) 2000, 2013, Oracle. All rights reserved.

Welcome to DGMGRL, type "help" for information.
Connected as SYSDBA.
DGMGRL>
CONVERT DATABASE cdb1_stby TO SNAPSHOT STANDBY;
Converting database "cdb1_stby" to a Snapshot Standby database, please wait...
Database "cdb1_stby" converted successfully
DGMGRL>

$
dgmgrl sys/Password1@cdb1
DGMGRL for Linux: Version 12.1.0.2.0 - 64bit Production

Copyright (c) 2000, 2013, Oracle. All rights reserved.

Welcome to DGMGRL, type "help" for information.
Connected as SYSDBA.
DGMGRL>
CONVERT DATABASE cdb1_stby TO PHYSICAL STANDBY;
Converting database "cdb1_stby" to a Physical Standby database, please wait...
Operation requires shut down of instance "cdb1" on database "cdb1_stby"
Shutting down instance "cdb1"...
Database closed.
Database dismounted.
ORACLE instance shut down.
Operation requires start up of instance "cdb1" on database "cdb1_stby"
Starting instance "cdb1"...
ORACLE instance started.
Database mounted.
Continuing to convert database "cdb1_stby" ...
Database "cdb1_stby" converted successfully
DGMGRL>

DGMGRL>
SHOW CONFIGURATION;
Configuration - my_dg_config

  Protection Mode: MaxPerformance
  Members:
  cdb1      - Primary database
    cdb1_stby - Physical standby database

Fast-Start Failover: DISABLED

Configuration Status:
SUCCESS   (status updated 38 seconds ago)

DGMGRL>

Comments (0)

Please to add comments

No comments yet. Be the first to comment!